IGC Code (International Code of the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk)
ID 3631 | 14.02.2017
The International Code of the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk (IGC Code), adopted by resolution MSC.5(48),has been mandatory under SOLAS chapter VII since 1 July 1986. The IGC Code applies to ships regardless of their size, including those of less than 500 gross tonnage, engaged in carriage of liquefied gases having a vapour pressure exceeding 2.8 bar absolute at a temperature of 37.8°C, and certain other substances listed in chapter 19 of the Code. The aim of the Code is to provide an international standard for the safe carriage by sea in bulk of liquefied gases and the substances listed in chapter 19, by prescribing the design and construction standards of ships involved in such carriage and the equipment they should carry so as to minimize the risk to the ship, to its crew and to the environment, having regard to the nature of the products involved.
The basic philosophy is one of ship types related to the hazards of the products covered by these codes, each of which may have one or more hazard properties. A further possible hazard may arise owing to the products being transported under cryogenic (refrigerated) or pressure conditions.
Severe collisions or strandings could lead to cargo tank damage and uncontrolled release of the product. Such release could result in evaporation and dispersion of the product and, in some cases, could cause brittle fracture of the ship's hull. The requirements in the codes are intended to minimize these risks as far as is practicable, based upon present knowledge and technology.
Throughout the development of the Code it was recognized that it must be based upon sound naval architectural and engineering principles and the best understanding available as to the hazards of the various products covered; furthermore that gas carrier design technology is not only a complex technology but is rapidly evolving and that the Code should not remain static. Therefore, IGC Code is kept under review, taking into account experience and technological development. The latest comprehensive amendments of the IGC Code were adopted by resolution MSC.370(93), expected to enter into force on 1 July 2016.
Code for the Construction Equipment of Ships Carrying Liquefied Gases in Bulk (GC Code) and Code for Existing Ships Carrying Liquefied Gases in Bulk (EGC Code)
Gas carriers constructed before 1 July 1986 and after 31 October 1976 should comply with the requirements of the Code for the Construction Equipment of Ships Carrying Liquefied Gases in Bulk (GC Code), while gas carriers that had already been trading prior to the application of the GC Code should comply with the requirements of the Code for Existing Ships Carrying Liquefied Gases in Bulk.
Rettifica regolamento (UE) 2024/1781 - 28.04.2025 ID 23886 | 28.04.2025 Rettifica del regolamento (UE) 2024/1781 del Parlamento europeo e del Consiglio, del 13 giugno 2024, che stabilisce il quadro per la definizione dei requisiti di progettazione ecocompatibile per prodotti sostenibili, modifica…
Leggi tutto
Decreto 25 marzo 2025 ID 23855 | 27.04.2025 Decreto 25 marzo 2025 Proroga del termine di conclusione e di rendicontazione degli interventi di adeguamento degli edifici scolastici alla normativa antisismica. (GU n.94 del 23.04.2025)_______ Art. 1. Proroga del termine di conclusione e rendicontazione…
Leggi tutto
Safety Gate: Rapid Alert System for Non-Food Consumer Products Report 14 del 14/04/2025 N. 02 SR/01178/25 Germania Approfondimento tecnico: Kit di conversione per smerigliatrice angolare Il prodotto “12" ELECTRIC CHAIN SAW STAND, mod. VB-8401, è stato respinto mentre veniva importato perché non…
Leggi tutto
Sentenza CP Sez. 4 del 22 aprile 2025 n. 15696 / Infortunio mortale - Responsabilità preposto alle lavorazioni ID 23883 | 27.04.2025 / In allegato Cassazione Penale Sez. 4 del 22 aprile 2025 n. 15696 - Caduta mortale dall'alto durante la pulizia della parete stradale. Responsabilità del preposto…
Leggi tutto
Strategia Italiana per le Realtà Virtuali e Aumentate / In consultazione fino al 24.05.2025 ID 23882 | 27.04.2025 / In allegato La “Strategia Italiana per le Realtà Virtuali e Aumentate come strumento di modernizzazione nelle filiere produttive” si configura come un intervento strategico volto a…
Leggi tutto
Decreto 9 aprile 2025 / CAM Servizi di ristoro ID 23881 | 26.04.2025 Decreto 9 aprile 2025 Aggiornamento dei «Criteri ambientali minimi per gli affidamenti relativi ai servizi di ristoro e alla distribuzione di acqua di rete a fini potabili», di cui al decreto 6 novembre 2023. (GU n.96 del…
Leggi tutto
Decreto Legislativo 29 dicembre 1992 n. 517 / Strumenti per pesare a funzionamento non automatico ID 23880 | 25.04.2025 Decreto Legislativo 29 dicembre 1992 n. 517Attuazione della direttiva 90/384/CEE in materia di strumenti per pesare a funzionamento non automatico, codificata nella direttiva…
Leggi tutto
Direttiva delegata (UE) 2015/13 ID 23879 | 25.04.2025 Direttiva delegata (UE) 2015/13 della Commissione, del 31 ottobre 2014, che modifica l'allegato III della direttiva 2014/32/UE del Parlamento europeo e del Consiglio, per quanto riguarda il campo di portata dei contatori dell'acqua. (GU L 3 del…
Leggi tutto
UNI EN ISO 22361:2023 / Linee guida gestione delle crisi di un'organizzazione ID 23878 | 25.04.2025 / In allegato Preview UNI EN ISO 22361:2023Sicurezza e resilienza - Gestione delle crisi - Linee guidaData disponibilità: 08 giugno 2023 La norma fornisce una guida sulla gestione delle crisi per…
Leggi tutto
Best Practices for Cyber Crisis Management / ENISA 2024 ID 23877 | 25.04.2025 / In allegato This study highlights the complexities behind the notion of cyber crisis and the degree of subjectivity it involves. The elevation of a large-scale cyber incident into a cyber crisis relies predominantly on…
Leggi tutto
Sentenza CP Sez. 4 del 22 aprile 2025 n. 15696 / Infortunio mortale - Responsabilità preposto alle lavorazioni ID 23883 | 27.04.2025 / In allegato Cassazione Penale Sez. 4 del 22 aprile 2025 n. 15696 - Caduta mortale dall'alto durante la pulizia della parete stradale. Responsabilità del preposto…
Leggi tutto
UNI EN ISO 22361:2023 / Linee guida gestione delle crisi di un'organizzazione ID 23878 | 25.04.2025 / In allegato Preview UNI EN ISO 22361:2023Sicurezza e resilienza - Gestione delle crisi - Linee guidaData disponibilità: 08 giugno 2023 La norma fornisce una guida sulla gestione delle crisi per…
Leggi tutto
Guidance on Dock shelters (FEM - October 2024) ID 23864 | 23.04.2025 / Attached Intention of this Guideline To provide users, architects, contractors and suppliers with an awareness of the benefits and specific characteristics of the different Dock shelter types used in the loading dock area.A dock…
Leggi tutto
UNI EN ISO 3164:2025 / Macchine movimento terra - DLV strutture di protezione - Note ID 23861 | 24.04.2025 / Note complete in allegato Pubblicata la norma UNI EN ISO 3164:2025 “Macchine movimento terra - Valutazioni di laboratorio delle strutture di protezione - Specifiche per il volume limite di…
Leggi tutto
Malaria di origine professionale: un secolo di tutela Inail / INAIL 2025 ID 23860 | 23.04.2025 / In allegato La malaria è una delle malattie infettive più diffuse nel mondo. In Italia ha influenzato diversi campi, portando alla promulgazione di leggi volte a risanare il Paese dalla malaria…
Leggi tutto
Interpello ambientale 17.04.2025 - BAT grandi impianti di combustione ID 23852 | 21.04.2025 / In allegato Testo interpello Ambientale Valutazioni ed autorizzazioni ambientali L’art. 27 del decreto-legge n. 77 del 31 maggio 2021 ha introdotto, all’art. 3 septies del D.lgs. 152/2006, l’istituto…
Leggi tutto
Restrizione microplastiche: Descrizione degli obblighi di comunicazione (1a scadenza 05.2026) ID 23849 | 19.04.2025 / In allegato (EN) La restrizione UE sugli usi intenzionali di microplastiche, entrata in vigore nell'ottobre 2023, include deroghe per determinati usi. Molti di questi sono soggetti…
Leggi tutto
UNI/PdR 167:2025 / PMI Requisiti e indirizzi operativi per la valutazione di conformità ID 23847 | 18.04.2025 / In allegato UNI/PdR 167:2025Adeguato assetto organizzativo, amministrativo e contabile delle PMI - Requisiti e indirizzi operativi per la valutazione di conformità La UNI/PdR fornisce…
Leggi tutto
Circolare Prot. n. 11456 del 14 aprile 2025 ID 23843 | 18.04.2025 / In allegato Parere relativo alle sanzioni previste dal Regolamento UE 1054/2020 in ordine alla sostituzione del tachigrafo di prima generazione con quello di nuova generazione ... Si fa riferimento alla nota del 27 marzo scorso di…
Leggi tutto
Interpello ambientale 14.04.2025 - Bonifiche / Applicazione limiti concentrazione soglia di contaminazione ID 23838 | 14.04.2025 / In allegato Testo interpello Ambientale L’art. 27 del decreto-legge n. 77 del 31 maggio 2021 ha introdotto, all’art. 3 septies del D.lgs. 152/2006, l’istituto…
Leggi tutto