IGC Code (International Code of the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk)
ID 3631 | 14.02.2017
The International Code of the Construction and Equipment of Ships Carrying Liquefied Gases in Bulk (IGC Code), adopted by resolution MSC.5(48),has been mandatory under SOLAS chapter VII since 1 July 1986. The IGC Code applies to ships regardless of their size, including those of less than 500 gross tonnage, engaged in carriage of liquefied gases having a vapour pressure exceeding 2.8 bar absolute at a temperature of 37.8°C, and certain other substances listed in chapter 19 of the Code. The aim of the Code is to provide an international standard for the safe carriage by sea in bulk of liquefied gases and the substances listed in chapter 19, by prescribing the design and construction standards of ships involved in such carriage and the equipment they should carry so as to minimize the risk to the ship, to its crew and to the environment, having regard to the nature of the products involved.
The basic philosophy is one of ship types related to the hazards of the products covered by these codes, each of which may have one or more hazard properties. A further possible hazard may arise owing to the products being transported under cryogenic (refrigerated) or pressure conditions.
Severe collisions or strandings could lead to cargo tank damage and uncontrolled release of the product. Such release could result in evaporation and dispersion of the product and, in some cases, could cause brittle fracture of the ship's hull. The requirements in the codes are intended to minimize these risks as far as is practicable, based upon present knowledge and technology.
Throughout the development of the Code it was recognized that it must be based upon sound naval architectural and engineering principles and the best understanding available as to the hazards of the various products covered; furthermore that gas carrier design technology is not only a complex technology but is rapidly evolving and that the Code should not remain static. Therefore, IGC Code is kept under review, taking into account experience and technological development. The latest comprehensive amendments of the IGC Code were adopted by resolution MSC.370(93), expected to enter into force on 1 July 2016.
Code for the Construction Equipment of Ships Carrying Liquefied Gases in Bulk (GC Code) and Code for Existing Ships Carrying Liquefied Gases in Bulk (EGC Code)
Gas carriers constructed before 1 July 1986 and after 31 October 1976 should comply with the requirements of the Code for the Construction Equipment of Ships Carrying Liquefied Gases in Bulk (GC Code), while gas carriers that had already been trading prior to the application of the GC Code should comply with the requirements of the Code for Existing Ships Carrying Liquefied Gases in Bulk.
MoVaRisCh 2025 - Aggiornamento 28.02.2025 - Bozza ID 23709 | 30.03.2025 / In allegato Pubblicato dalla AUSL di Modena, tramite il Servizio Prevenzione e Sicurezza negli Ambienti di Lavoro (SPSAL), il modello aggiornato MoVaRisCh 2025 approvato dai gruppi tecnici delle Regioni: Toscana / Emilia…
Leggi tutto
Safety Gate: Rapid Alert System for Non-Food Consumer Products Report 10 del 07/03/2025 N. 01 SR/00818/25 Francia Approfondimento tecnico: Friggitrice Il prodotto, di marca MANDINE, mod. MDF10-19, è stato sottoposto alla procedura di ritiro dal mercato perché non conforme alla Direttiva…
Leggi tutto
Sentenza 27 marzo 2025 causa C-515/23 / Italia sanzionata per mancato trattamento acque reflue urbane ID 23707 | 30.03.2025 / In allegato Corte di Giustizia europea - Sentenza 27 marzo 2025 causa C-515/23 «Inadempimento di uno Stato - Trattamento delle acque reflue urbane - Direttiva 91/271/CEE -…
Leggi tutto
UNI 11973:2025 / Interconnessione degli edifici sostenibili nelle città ID 23706 | 30.03.2025 / In allegato Preview UNI 11973:2025Città, comunità e infrastrutture sostenibili - Il contributo degli edifici alla sostenibilità - Modello metodologico per l’integrazione e l’interconnessione degli…
Leggi tutto
UNI EN 17942:2025 / Requisiti di sicurezza apparecchiature saldatura a gas ossitaglio a fiamma libera ID 23705 | 30.03.2025 / Preview allegato UNI EN 17942:2025Saldatura e processi correlati - Apparecchiature per la saldatura a gas - Requisiti di sicurezza per le apparecchiature di processo termico…
Leggi tutto
Agreement on the International Carriage of Perishable Foodstuffs and on the Special Equipment to be Used for such Carriage (ATP) / June 2024 ID 23704 | 29.03.2025 / In allegato The text below comprises the Agreement itself and its annexes with the latest amendments which enter into force on 22 June…
Leggi tutto
Regulation (EU) 2016/425 on PPE: Harmonised standards published in the OJ | Update 14 Febraury 2025 / Format PDF / XLS ID 23703 | 28.03.2025 / Official list in attachment (PDF / XLS) EN / IT Summary of references of harmonised standards published in the Official Journal - Regulation (EU)…
Leggi tutto
Decisione di esecuzione (UE) 2025/424 / Norme armonizzate Direttiva ISF Marzo 2025 ID 23702 | 28.03.2025 Decisione di esecuzione (UE) 2025/424 della Commissione, del 4 marzo 2025, che modifica la decisione di esecuzione (UE) 2023/2584 per quanto riguarda l’aggiornamento delle norme di riferimento e…
Leggi tutto
Applicazione di tecniche isotopiche per lo studio ed il monitoraggio delle reti trofiche marine ID 23701 | 28.03.2025 / In allegato L'analisi degli isotopi stabili ha trasformato le scienze ambientali, fornendo uno strumento potente per lo studio delle reti trofiche marine e la gestione delle…
Leggi tutto
Circolare MLPS n. 6 del 27 marzo 2025 / Principali interventi attuati con “Collegato lavoro” ID 23700 | 28.03.2025 / In allegato Circolare ministeriale n. 6 del 27 marzo 2025 che illustra i principali interventi attuati con il cosiddetto “Collegato lavoro” (legge 13 dicembre 2024 n. 203 recante…
Leggi tutto
MoVaRisCh 2025 - Aggiornamento 28.02.2025 - Bozza ID 23709 | 30.03.2025 / In allegato Pubblicato dalla AUSL di Modena, tramite il Servizio Prevenzione e Sicurezza negli Ambienti di Lavoro (SPSAL), il modello aggiornato MoVaRisCh 2025 approvato dai gruppi tecnici delle Regioni: Toscana / Emilia…
Leggi tutto
Sentenza 27 marzo 2025 causa C-515/23 / Italia sanzionata per mancato trattamento acque reflue urbane ID 23707 | 30.03.2025 / In allegato Corte di Giustizia europea - Sentenza 27 marzo 2025 causa C-515/23 «Inadempimento di uno Stato - Trattamento delle acque reflue urbane - Direttiva 91/271/CEE -…
Leggi tutto
UNI 11973:2025 / Interconnessione degli edifici sostenibili nelle città ID 23706 | 30.03.2025 / In allegato Preview UNI 11973:2025Città, comunità e infrastrutture sostenibili - Il contributo degli edifici alla sostenibilità - Modello metodologico per l’integrazione e l’interconnessione degli…
Leggi tutto
UNI EN 17942:2025 / Requisiti di sicurezza apparecchiature saldatura a gas ossitaglio a fiamma libera ID 23705 | 30.03.2025 / Preview allegato UNI EN 17942:2025Saldatura e processi correlati - Apparecchiature per la saldatura a gas - Requisiti di sicurezza per le apparecchiature di processo termico…
Leggi tutto
Agreement on the International Carriage of Perishable Foodstuffs and on the Special Equipment to be Used for such Carriage (ATP) / June 2024 ID 23704 | 29.03.2025 / In allegato The text below comprises the Agreement itself and its annexes with the latest amendments which enter into force on 22 June…
Leggi tutto
Regulation (EU) 2016/425 on PPE: Harmonised standards published in the OJ | Update 14 Febraury 2025 / Format PDF / XLS ID 23703 | 28.03.2025 / Official list in attachment (PDF / XLS) EN / IT Summary of references of harmonised standards published in the Official Journal - Regulation (EU)…
Leggi tutto
Circolare MLPS n. 6 del 27 marzo 2025 / Principali interventi attuati con “Collegato lavoro” ID 23700 | 28.03.2025 / In allegato Circolare ministeriale n. 6 del 27 marzo 2025 che illustra i principali interventi attuati con il cosiddetto “Collegato lavoro” (legge 13 dicembre 2024 n. 203 recante…
Leggi tutto
Rischi correlati ad eccesso di confidenza da parte degli operatori depositi di sostanze pericolose ID 23699 | 27.03.2025 / In allegato Fact Sheet INAIL 2025 Rischi correlati ad eccesso di confidenza da parte degli operatori dei depositi di sostanze pericolose e degli impianti di processo Il…
Leggi tutto
UNI ISO 19388:2025 / Fanghi - impianti di digestione anaerobica ID 23698 | 27.03.2025 / In allegato Preview UNI ISO 19388:2025Recupero, riciclaggio, trattamento e smaltimento dei fanghi - Requisiti e raccomandazioni per il funzionamento degli impianti di digestione anaerobica La norma stabilisce i…
Leggi tutto
Antifungino-resistenza in agricoltura: un allarme globale / INAIL 2025 ID 23697 | 27.03.2025 / In allegato Factsheet INAIL 2025 L’uso improprio di antibiotici, i cambiamenti climatici e la globalizzazione possono favorire l’insorgenza di micosi secondarie, contribuire al fenomeno delle resistenze e…
Leggi tutto