Sustainable Consumption and Production (SCP) policy framework
This fitness check covers Regulation (EC) No 1221/2009 of the European Parliament and Council of 25 November 2009 on the voluntary participation by organisations in a Community ecomanagement and audit scheme (EMAS)(1) and Regulation (EC) No 66/2010(2) of the European Parliament and Council of 25 November 2009 on the EU Ecolabel, and their contribution to the Sustainable Consumption and Production (SCP) policy framework.
It is a retrospective exercise, aiming to assess the two Regulations’ actual performance.
The purpose of the fitness check is to evaluate the implementation of EMAS and EU Ecolabel Regulations and to assess their effectiveness, efficiency, relevance, coherence and EU added value. The fitness check is not evaluating the performance of the SCP policy framework as a whole, nor individual instruments other than EMAS and the EU Ecolabel.
The fitness check falls under the Commission’s Regulatory Fitness and Performance Programme. The work presented here is guided by the fitness check mandate for the EMAS and EU Ecolabel Regulations(3).
As the fitness check is a retrospective exercise, it does not answer forward-looking questions included in the mandate. The fitness check will be used by the Commission as a basis to inform future policy decisions on both schemes.
EMAS and the EU Ecolabel as part of the sustainable consumption and production framework
Economic activities connected to products and services have an impact on the Environment and on people’s health and quality of life.
Sustainable consumption and production mitigate the negative environmental impacts of such activities and balance the need for such mitigation with the need for economic and social development. Instruments like EMAS and the EU Ecolabel encourage voluntary activities with reduced environmental impact and improve their economic potential. EMAS and the EU Ecolabel are part of the EU policy framework for sustainable consumption and production. The EU Ecolabel was created in 1992 and EMAS in 1995 but both were re-launched as part of the Communication on sustainable consumption and production and the sustainable industrial policy action plan (SCP action plan) in 2008.
Since 2008, several initiatives have further developed the framework on sustainability. These include: the Communication on EUROPE 2020
- a strategy for smart, sustainable and inclusive growth;
(5) the Communication on a Roadmap to a Resource Efficient Europe; (6) the seventh EU Environmental action programme calling for a more effective and coherent SCP policy framework(7) and the 2015 EU action plan for the circular economy. (8) In the Communication ‘Building the single market for green products - facilitating better information on the environmental performance of products and organisations’(9), the Commission recognised the need for a common method to quantify the environmental impact (footprint) of products and organisations and benchmark them against each other (within the same product group(10) or sector).
Such work has clear links to both the EU Ecolabel and EMAS, but as this work is still in the pilot phase, results were not available for inclusion in this fitness check.
1 Regulation (EC) No 1221/2009 of the European Parliament and Council of 25 November 2009 on the voluntary participation by organisations in a Community eco-management and audit scheme (EMAS). 2 Regulation (EC) No 66/2010 of the European Parliament and Council of 25 November 2009 on the EU Ecolabel and their contribution to the Sustainable Consumption and Production (SCP) policy framework. 3 Fitness check Mandate for EU-EMAS and EU-Ecolabel regulations. 4 COM(2008) 397. 5 COM(2010) 2020. 6 COM(2011) 571. 7 Decision No 1386/2013/EU. 8 COM(2015) 614/2. 9 COM(2013) 196. 10 The EU Ecolabel Regulation defines a product group as ‘a set of products that serve similar purposes and are similar in terms of use, or have similar functional properties, and are similar in terms of consumer perception.
Decreto ministeriale del 3 marzo 2015 n. 4847 / Scadenze controllo funzionale attrezzature prodotti fitosanitari ID 23553 | 03.03.2025 / In allegato Articolo 1 (Finalità) 1. Il presente decreto individua le diverse scadenze per il controllo funzionale al quale dovranno essere sottoposte le…
Leggi tutto
Nota MIPAAF 1° gennaio 2021 / Intervalli Controllo funzionale irroratrici ID 23551 | 03.03.2025 / In allegato Oggetto: Intervalli Controllo funzionale irroratrici dal 1° gennaio 2021_______ Con nota di pari oggetto del 15 dicembre 2020, la Direzione Agroambiente, Programmazione e gestione ittica e…
Leggi tutto
UNI 11325-8:2025 / Ispezioni e manutenzioni su attrezzature a pressione con metodologie valutazione del rischio (RBI) ID 23550 | 03.03.2025 / In allegato Preview UNI 11325-8:2025Attrezzature a pressione - Messa in servizio ed utilizzazione delle attrezzature e degli insiemi a pressione - Parte 8:…
Leggi tutto
Statistiche sull’incidentalità nei trasporti stradali | Rapporto 2024 ID 23549 | 03.03.2025 / In allegato Il Rapporto 2024 contiene relazioni di sintesi, statistiche, tabelle di dati e grafici, offre i principali risultati di studi, analisi ed elaborazione dati sull’incidentalità stradale prodotti…
Leggi tutto
Decisione di esecuzione (UE) 2025/439 / Elenco di controllo sostanze da sottoporre a monitoraggio acque ID 23548 | 03.03.2025 Decisione di esecuzione (UE) 2025/439 della Commissione, del 28 febbraio 2025, che istituisce un elenco di controllo delle sostanze da sottoporre a monitoraggio a livello…
Leggi tutto
MUD | Modello Unico di dichiarazione ambientale anno 2025 / Scadenza 28 giugno 2025 ID 23547 | 03.03.2025 È pubblicato in Gazzetta Ufficiale (Serie Generale) n. 49 del 28 febbraio 2025, il Decreto del Presidente del Consiglio dei ministri 29 gennaio 2025 recante l’approvazione del Modello Unico di…
Leggi tutto
Guide to application of the lifts directive 2014/33/EU - January 2025 ID 23546 | 03.03.2025 / Attached This GUIDE TO APPLICATION OF THE LIFTS DIRECTIVE (hereafter Lifts Guide or Guide) is intended to be a manual for all parties directly or indirectly affected by Directive 2014/33/EU, commonly…
Leggi tutto
Linee guida per un uso sostenibile dei prodotti fitosanitari - II edizione (Dicembre 2016) ID 23545 | 02.03.2025 / In allegato Manuale per la gestione dei prodotti fitosanitari nelle aziende agricole. Il manuale, aggiornato a dicembre 2016, raccoglie un insieme di raccomandazioni in grado di…
Leggi tutto
Linee guida per un uso sostenibile dei prodotti fitosanitari / RL 2019 ID 23544 | 02.03.2025 / In allegato Favorire una cultura della prevenzione e dell’anticipazione del rischio connesso all’uso dei prodotti fitosanitari, attraverso la condivisione di competenze ed esperienze tra ricerca, aziende…
Leggi tutto
Progetto UNI1612969 (UNI 11104) / Calcestruzzo - Specificazioni complementari per l'applicazione della UNI EN 206 Ed. 2021 ID 23543 | 02.03.2025 / Progetto allegato La commissione UNI/CT 009 Cemento, malte, calcestruzzi e cemento armato volge il suo interesse al progetto UNI1612969 (allegato) dal…
Leggi tutto
UNI 11325-8:2025 / Ispezioni e manutenzioni su attrezzature a pressione con metodologie valutazione del rischio (RBI) ID 23550 | 03.03.2025 / In allegato Preview UNI 11325-8:2025Attrezzature a pressione - Messa in servizio ed utilizzazione delle attrezzature e degli insiemi a pressione - Parte 8:…
Leggi tutto
Guide to application of the lifts directive 2014/33/EU - January 2025 ID 23546 | 03.03.2025 / Attached This GUIDE TO APPLICATION OF THE LIFTS DIRECTIVE (hereafter Lifts Guide or Guide) is intended to be a manual for all parties directly or indirectly affected by Directive 2014/33/EU, commonly…
Leggi tutto
Linee guida per un uso sostenibile dei prodotti fitosanitari - II edizione (Dicembre 2016) ID 23545 | 02.03.2025 / In allegato Manuale per la gestione dei prodotti fitosanitari nelle aziende agricole. Il manuale, aggiornato a dicembre 2016, raccoglie un insieme di raccomandazioni in grado di…
Leggi tutto
Linee guida per un uso sostenibile dei prodotti fitosanitari / RL 2019 ID 23544 | 02.03.2025 / In allegato Favorire una cultura della prevenzione e dell’anticipazione del rischio connesso all’uso dei prodotti fitosanitari, attraverso la condivisione di competenze ed esperienze tra ricerca, aziende…
Leggi tutto
Progetto UNI1612969 (UNI 11104) / Calcestruzzo - Specificazioni complementari per l'applicazione della UNI EN 206 Ed. 2021 ID 23543 | 02.03.2025 / Progetto allegato La commissione UNI/CT 009 Cemento, malte, calcestruzzi e cemento armato volge il suo interesse al progetto UNI1612969 (allegato) dal…
Leggi tutto
UNI 11104:2016 / Calcestruzzo - Specificazioni complementari per l'applicazione della EN 206 ID 23542 | 02.03.2025 (In aggiornamento a supporto della norma UNI EN 206:2021) UNI 11104:2016Calcestruzzo - Specificazione, prestazione, produzione e conformità - Specificazioni complementari per…
Leggi tutto
UNI EN 206:2021 / Calcestruzzo ID 23541 | 02.03.2025 / In allegato Preview UNI EN 206:2021Calcestruzzo - Specificazione, prestazione, produzione e conformità Data disponibilità: 25 gennaio 2022 La norma si applica al calcestruzzo per strutture gettate in sito, strutture prefabbricate e componenti…
Leggi tutto
Linee Guida per la Sorveglianza Sanitaria in Edilizia / RL 2025 ID 23534 | 28.02.2025 / In allegato Con Decreto n° 1817 del 13/02/2025 della Direzione Generale Welfare sono state aggiornate le “Linee Guida Regionali per la Sorveglianza Sanitaria in Edilizia” che erano state emanate con Decreto…
Leggi tutto
UNI EN 12464-2:2025 / Illuminazione posti di lavoro in esterno ID 23533 | 28.02.2025 / In allegato Preview UNI EN 12464-2:2025Luce e illuminazione - Illuminazione dei posti di lavoro - Parte 2: Posti di lavoro in esterno La norma specifica i requisiti di illuminazione per le persone nei posti di…
Leggi tutto
UNI 11970:2025 / Installatore di gru caricatrici su veicoli ID 23532 | 28.02.2025 / In allegato Preview UNI 11970:2025 Attività professionali non regolamentate - Installatore di gru caricatrici su veicoli - Requisiti di conoscenza, abilità, autonomia e responsabilità La norma si prefigge lo scopo…
Leggi tutto