UNI EN 15094:2022 / Laminatoi a freddo di prodotti piani
UNI EN 15094:2022 Sicurezza del macchinario - Requisiti di sicurezza per laminatoi a freddo di prodotti piani
La norma specifica i requisiti generali di sicurezza per laminatoi a freddo di prodotti piani. La norma è applicabile a: impianti (macchinari, attrezzature, dispositivi) utilizzati per la fabbricazione di prodotti piani laminati a freddo di metallo dalla fornitura del materiale in ingresso, tramite le gabbie di laminazione con dispositivi di cambio rulli, alla rimozione del materiale.
Data entrata in vigore: 15 Settembre 2022
Sostituisce: UNI EN 15094:2009
Recepisce: EN 15094:2022
This document is a type-C standard as stated in EN ISO 12100:2010.
The machinery concerned and the extent to which hazards, hazardous situations or hazardous events are covered are indicated in the Scope of this document.
Where for clarity an example of a preventative measure is given, this should not be considered as the only possible solution. Any other solution leading to the same risk reduction is permissible if an equivalent level of safety is achieved.
When requirements of this type-C standard are different from those which are stated in type-A or -B standards, the requirements of this type-C standard take precedence over the requirements of the other standards for machines that have been designed and built according to the requirements of this type-C standard.
This document is of relevance, in particular, for the following stakeholder groups representing the market players with regard to machinery safety:
- machine and/or plant manufacturers (small, medium and large enterprises);
- health and safety bodies (regulators, accident prevention organizations, market surveillance, etc.).
Others can be affected by the level of machinery safety achieved with the means of the document by the above-mentioned stakeholder groups:
- machine and/or plant users/employers (small, medium and large enterprises);
- service providers, e.g. for maintenance (small, medium and large enterprises).
The above-mentioned stakeholder groups have been given the possibility to participate at the drafting process of this document.