Slide background




Guidelines Regulations (EU) n. 811-812-813-814/2013 and Regulations (EU) 2015/1187-1189

ID 13309 | | Visite: 5110 | Guide Nuovo ApproccioPermalink: https://www.certifico.com/id/13309

Guidelines Regolations EU  n  811 812 813 814 2013

Guidelines Regulations (EU) n. 811-812-813-814/2013 and Regulations (EU) 2015/1187-1189

EC, 2018

The Ecodesign and Energy Labelling Regulations for space and water heaters were published in 2013 and for solid fuel boilers in 2015. The regulations establish minimum requirements and an energy labelling scheme for the products in their scope. These guidelines aim to help relevant stakeholders, including industry and public authorities, to implement the Regulations in practice. They summarise the most relevant information from the regulations to give SMEs an introduction to the subject matter and answer the most common questions.

Throughout this document, the wording "space heaters and combination heaters" is used in reference to the products in scope of Regulations (EU) 811/2013 and (EU) 813/2013; the wording "water heaters" is used in reference to the products in scope of Regulations (EU) 812/2013 and (EU) 814/2013; and the wording "solid fuel boilers" is used in reference to the products in scope of Regulations (EU) 2015/1187 and (EU) 2015/1189.

The guidelines are intended to be used only for facilitating the implementation of the Regulations. They are not intended to replace the Regulations or to provide “interpretation” beyond their intent. The guidelines only reflect the opinion of the Commission services and are not legally binding. A finally binding legal interpretation of EU legislation may only be provided by the European Court of Justice. The guidelines are without prejudice to the position the Commission might take should an issue arise in a procedure before the European Court of Justice.

...

Table of Contents

1. Purpose of the guidelines and disclaimer
2. The Regulations
3. Scope
3.1. Space Heaters and Combination Heaters
3.2. Water Heaters
3.3. Solid fuel boilers
4. Product environmental impacts
5. State of play of legislation
5.1. Timetable
5.2. Transitional provision
5.3. Review
6. Key requirements
6.1. Ecodesign requirements
6.2. Energy Labelling requirements
6.3. Labelling requirements for packages
6.4. Packages where not all information is available
7. Measurements and calculations, the Relationship between the regulations, the commission communications and harmonised standards
8. Frequently Asked Questions

...

Fonte: EC

Collegati

Descrizione Livello Dimensione Downloads
Allegato riservato Guidelines Regulations EU n. 811-812-813-814 2013.pdf
EC 2018
1237 kB 26

Tags: Marcatura CE Nuovo approccio Direttiva ecodesign Abbonati Marcatura CE

Ultimi archiviati Normazione

Lug 10, 2025 355

UNI ISO 22340:2025

UNI ISO 22340:2025 / Guidelines for an enterprise protective security architecture and framework ID 24267 | 10.07.2025 / In allegato UNI ISO 22340:2025Sicurezza e resilienza - Sicurezza protettiva - Linee guida per un'architettura e un quadro di sicurezza di protezione aziendale. Data… Leggi tutto
UNI PdR 175 2025
Lug 10, 2025 366

UNI/PdR 175:2025 / Metodologie manutenzione delle tubazioni di scarico a gravità con tecnologie CIPP

UNI/PdR 175:2025 / Metodologie manutenzione delle tubazioni di scarico a gravità con tecnologie CIPP ID 24261 | 10.07.2025 / In allegato UNI/PdR 175:2025Metodologie e sistemi per il rinnovamento, la connessione e la manutenzione delle tubazioni di scarico a gravità (max. 0,5 bar) con tecnologie… Leggi tutto
Giu 23, 2025 698

UNI EN 12385-1:2009

UNI EN 12385-1:2009 / Requisiti di sicurezza funi di acciaio ID 24153 | 23.06.2025 / Preview attached Funi di acciaio - Sicurezza - Parte 1: Requisiti generali Data disponibilità: 12 gennaio 2010________ La presente norma è la versione ufficiale della norma europea EN 12385-1:2002+A1 (edizione… Leggi tutto

Più letti Normazione