Decision C(2025)129 of 20.1.2025 - Mandate M/605 (Standards for Machinery Regulation)

Decision C(2025)129 of 20.1.2025 - Mandate M/605 (Standards for Machinery Regulation)

ID 26344 | 29 Maggio 2026 / Allegati

Commission implementing decision of 20.1.2025 on a standardisation request to the European Committee for Standardization and to the European Committee for Electrotechnical Standardization as regards machinery and related products in support of Regulation (EU) 2023/1230 of the European Parliament and of the Council.
__________

Article 1 Requested standardisation activities

1. The European Committee for Standardization (‘CEN’) and the European Committee for Electrotechnical Standardization (‘CENELEC’) are requested to draft new harmonised standards and European standardisation deliverables listed in Table 1 of
Annex I to this Decision and to amend or revise the existing harmonised standards and European standardisation deliverables listed in Table 2 of Annex I to this Decision, in support of Regulation (EU) 2023/1230, for machinery, related products and partly completed machinery by the deadlines set out in that Annex.

2. If CEN and CENELEC do not amend or revise the harmonised standards referred to in Annex I to Commission Implementing Decision (EU) 2023/1586, they shall, by 20 January 2026, inform the Commission of the references of those standards and, where relevant, of the reasons why their amendment or revision is not under preparation.

3. The harmonised standards and European standardisation deliverables referred to in paragraph 1 shall meet the requirements set out in Annex II.

4. CEN and CENELEC shall provide the Commission with the titles of the requested harmonised standards in all the official languages of the Union.

[...]

Article 4 Validity of the standardisation request

1. Where, in accordance with Article 10(3) of Regulation (EU) No 1025/2012, CEN or CENELEC indicate that they do not accept the request referred to in Article 1(1) of this Decision, that request shall not constitute a basis for the standardisation activities
referred to in Article 1(1) of this Decision for the standardisation organisation concerned.

2. This Decision shall expire on 20 January 2035.

Article 5 Expiry of existing standardisation mandates

Standardisation mandates M/396 of 19 December 2006 and M/471 of 29 June 2010 shall expire on 20 January 2027.
...
add more

Collegati
Regulation on machinery | Regulation (EU) 2023/1230
Regolamento (UE) 2023/1230
ISO 12100:2010 in revisione: attesa 2026

Allegati (Riservati) Abbonati Macchine

Allegati

	Descrizione	Lingua	Dimensioni	Downloads
	Decision C(2025)129 of 20.1.2025 Abbonati Macchine	IT	128 kB	0
	Decision C(2025)129 of 20.1.2025 - Annex Abbonati Macchine	EN	254 kB	0