Draft Guidance on the compilation of safety data sheets | Vers. 4.0 2020

ID 10770 | | Visite: 4353 | Documenti Riservati ChemicalsPermalink: https://www.certifico.com/id/10770

Draft Guidance SDS

Draft Guidance on the compilation of safety data sheets | Vers. 4.0 2020

Guidance on the compilation of safety data sheets Draft (Public) Version 4.0 April 2020

Version 4.0 Update of the guidance to take into account the revised Annex II that will apply from January 2021.

Safety data sheets (SDSs) have been a well-accepted and effective method for the provision of information to recipients of substances and mixtures in the EU. These have been made an integral part of the system of Regulation (EC) N° 1907/2006 (REACH). The original requirements of REACH for SDSs have been further adapted to take into account the rules for safety data sheets of the Global Harmonised System (GHS) and the implementation of other
elements of the GHS into EU legislation that were introduced by Regulation (EC) N° 1272/2008 (CLP) via amendments to Annex II of REACH.

The SDS provides a mechanism for transmitting appropriate safety information on substances and mixtures where:

- a substance or a mixture meets the criteria for classification as hazardous according to CLP; or
- a substance is persistent, bioaccumulative and toxic (PBT) or very persistent and very bioaccumulative (vPvB), according to the criteria given in Annex XIII of REACH, or;
- a substance is included in the candidate list for eventual authorisation according to Article 59 of REACH for any other reasons.
(See Article 31(1) of REACH).

Under certain conditions some mixtures which do not meet the criteria for classification as hazardous according to CLP also require an SDS to be prepared or be made available on request (See Article 31 of REACH and notes to tables 3.4.6, 3.6.2, 3.7.2, 3.8.3 and 3.9.4 of Annex I of CLP).

SDSs do not have to be provided for articles. Although the SDS format may, for a few specific 26 articles, be used to convey safety information down the supply chain, it is not adapted to most articles 27.

The SDS follows a 16-section format which is internationally agreed. The SDS must be supplied in an official language of the Member State(s) where the substance or mixture is placed on the market, unless the Member State(s) concerned provide(s) otherwise (Article 31 of REACH).

Where a Chemical Safety Report (CSR) is required to be prepared for a substance, the information in the SDS for the substance must be consistent with that provided in the CSR as well as with that provided in the registration dossier. In addition, according to Article 31 of REACH, registrants and downstream users that are required to prepare a CSR, must place the relevant exposure scenario(s) into an annex to the safety data sheet. Downstream users have to consider relevant exposure information received from suppliers when compiling their safety data sheets. For mixtures, there are several options for placing relevant exposure scenarios into an annex or for including relevant exposure information in the core Sections 1 – 16 of the SDS. If however, a Downstream User is required to prepare his own CSR under Article 37 of REACH and this results in the generation of an exposure scenario, this exposure scenario must be placed in an annex to the SDS.

...

Fonte: ECHA

Collegati:

Descrizione Livello Dimensione Downloads
Allegato riservato Draft Guidance on the compilation of safety data sheets Vers. 4.0 2020.pdf
ECHA Vers. 4.0 April 2020
870 kB 11

Tags: Chemicals Schede Dati Sicurezza SDS Abbonati Chemicals Guida ECHA